|
RRP £1512
Panel Features:
Hi & Lo inputs.
Channel
One:
Volume.
Tone.
Channel
Two:
Volume.
Treble.
Bass.
Middle.
Master
Reverb.
Switch:
Peak A-B-C
Mains (On/Off).
Stand
By.
Studio.
Valve Complement:
ECC83 (x3)
ECC81 (x1)
6L6 (x3)
Output
4, 8, 16 Ohms
Size
and Weight
14.8 Kgs
32.56
lbs
Width 22" (56cm) Depth
10" (26cm) Height 9 3/4
" (24cm)
More
specification details in the manual.
|
Rambler 25
About
Rambler 25
This
design is different in many ways.
Not just the look but also features a 3 valve switchable output to
obtain output drive distortion at different “Stage” levels. There is a
15 watt head and a 25 watt head with reverb, cabinets are
1 X 12,
2 X 12,
2 X 10, or even a 1 X 15 as requested.
With
the new Rambler there is no pre amp distortion (master volume).
This is achieved only in the output stage. It has two channels, Channel 1
with volume and tone controls, the core sound is just like our Plexi
amp. Channel 2 has a cleaner sound with a 3 way tone stack similar to our Romany
pro amp.
The
output is single ended Class "A" with 3 output valves. Due to
this design other valves may be used without any bias adjustment,
Suggestions would be EL34's, 5881's or KT66's. These valves are switched
so you can use 1, 2 or 3 valves giving you different levels of head room
(Peak) This enable’s you to drive the output hard and achieve a range of
distortion levels without
getting too loud in the band mix. For home and studio use It also
has a “Studio Switch” this reduces the output by 3/4.
|
